Welcome to WECHIP | Register

Home > Industry Information > TCJA106M025R0150: High-Performance Tantalum Polymer Capacitor

TCJA106M025R0150: High-Performance Tantalum Polymer Capacitor

Auth: Date:2025/6/27 Source:WECHIP Visit:22 Related Key Words: capacitor filter decoupling ESR transducer

I. Chip Introduction

TCJA106M025R0150 is a high-performance tantalum polymer capacitor produced by KYOCERA AVX. It features a capacitance value of 10µF and a rated voltage of 25V, 

and is packaged in 1206 (metric 3216). With a compact size, it is suitable for filtering, decoupling and energy storage applications in various electronic devices.

 

II. Basic Characteristics

TCJA106M025R0150 is a tantalum polymer capacitor produced by KYOCERA AVX. The following are its basic characteristics:

Capacitance value: 10µF

Rated voltage: 25V

Package type: 1206

Equivalent series resistance (ESR) : 150mΩ @ 100kHz

Accuracy: ±20%

Operating temperature range: -55°C to 105°C

 

III. Main Characteristics

TCJA106M025R0150 is a tantalum polymer capacitor produced by KYOCERA AVX and has the following characteristic functions:

1.Low ESR

The equivalent series resistance (ESR) is only 150mΩ at 100kHz. The low ESR helps to reduce power consumption and heat generation, and improve the efficiency and stability of the circuit.

2.High reliability

The adoption of solid polymer electrolytes avoids the evaporation and leakage problems of liquid electrolytes, thereby providing a longer service life and higher reliability.

3.Excellent temperature characteristics

The operating temperature range is wide, from -55°C to 105°C, and the temperature has a relatively small impact on the capacitance value, 

making it capable of adapting to more severe working environments

4.Stable time-domain performance

It has a benign failure mode under the recommended usage conditions and will not cause serious damage to the circuit even in the event of a fault

 

IV. Application Scenarios

The TCJA106M025R0150 tantalum polymer capacitor, with its low ESR, high reliability, excellent temperature characteristics, small size design and stable time-domain performance, 

is suitable for a variety of electronic devices and application scenarios. The following are the main application scenarios of this type of capacitor:

1. Power supply circuit

Power supply filtering: In the power supply circuit, TCJA106M025R0150 can be used to filter out high-frequency noise and ripple in the power supply, ensuring a stable output of the power supply. 

Its low ESR feature enables it to perform well in high-frequency applications, effectively reducing power consumption and heat generation.

Decoupling capacitors: Provide stable power supply for integrated circuits and reduce the impact of power supply noise on circuit performance. Especially in high-frequency and high-power power management, 

low ESR capacitors can significantly enhance the stability and efficiency of circuits.

2. Mobile devices

Smartphones and tablets: Among these devices, the small size design of TCJA106M025R0150 enables it to be easily integrated into a compact circuit board, while providing efficient filtering and decoupling functions 

to ensure high performance and low power consumption of the device.

Wearable devices: Due to its small size and high reliability, this capacitor is highly suitable for space-constrained wearable devices such as smartwatches and health monitoring wristbands.

3. Computers and laptops

Power management: In the power management modules of computers and laptops, TCJA106M025R0150 can be used for filtering and decoupling to ensure the stability and reliability of the power supply.

Motherboard and graphics card: In the power circuits of the motherboard and graphics card, this capacitor can effectively reduce power noise and enhance the stability and performance of the circuit.

4. Automotive electronics

In-vehicle infotainment system: In the in-vehicle infotainment system, TCJA106M025R0150 can be used for power filtering and decoupling to ensure the stable operation of the system under various working conditions.

Advanced Driver Assistance Systems (ADAS) : In an ADAS system, this capacitor can provide efficient power management to ensure the stable operation of sensors and processors.

5. Industrial Control

PLC and automation equipment: In industrial control PLC and automation equipment, TCJA106M025R0150 can be used for power filtering and decoupling to ensure the reliable operation of the equipment in harsh environments.

Frequency converters and inverters: In frequency converters and inverters, this capacitor can provide efficient power management, reducing power noise and electromagnetic interference.

 

V. Summary

The TCJA106M025R0150 tantalum polymer capacitor, with its low ESR, high reliability and excellent temperature characteristics, can provide efficient power management, filtering and decoupling functions 

for power management, automotive electronics, industrial control, medical equipment and Internet of Things devices, ensuring the high performance and high reliability of the equipment.

Industry Information

Product Index :