Welcome to WECHIP | Register

Home > Industry Information > Analysis Of The High-Performance Characteristics Of IPA80R450P7XKSA1

Analysis Of The High-Performance Characteristics Of IPA80R450P7XKSA1

Auth: Date:2025/6/20 Source:WECHIP Visit:26 Related Key Words: MOSFET Zener diode adapter capacitance

I. Introduction to IPA80R450P7XKSA1 Chip

The IPA80R450P7XKSA1 is a high-performance N-channel MOSFET chip produced by Infineon Technologies and belongs to the CoolMOS™ P7 series.

 

II. Basic Characteristics

Type: N-channel MOSFET.

Operating temperature range (TJ) : -55°C to 150°C.

Package type: TO-220-3F

Drain-source voltage (Vdss) : 800V.

Continuous drain current (Id) : 11A (at 25°C).

On-resistance (Rds(on)) : 450mΩ (under conditions of 4.5A and 10V).

Gate charge (Qg) : 24nC (at 10V).

Input capacitance (Ciss) : 770pF (under 500V conditions).

 

III. Characteristic Advantages

· High voltage withstand capacity: The drain-source voltage (Vdss) can reach up to 800V, making it suitable for high-voltage application scenarios.

· Low on-resistance: Under conditions of 4.5A and 10V, the on-resistance (Rds(on)) is only 450mΩ, which helps to reduce power loss.

· Fast switching performance: The gate charge (Qg) is only 24nC (at 10V), and the input capacitance (Ciss) is 770pF (at 500V), enabling fast switching operations.

· High reliability: Operating temperature range from -55°C to 150°C, integrated Zener diode ESD protection up to level 2 (HBM), reducing ESD-related failures.

 

IV. Application Scenarios

1.Switching Power Supply

This chip is suitable for low-power switching power supply applications, including adapters, chargers, LED drivers, audio switching power supplies, auxiliary power supplies and industrial power supplies, etc. 

Its high withstand voltage (800V) and low on-resistance (450mΩ) characteristics can significantly improve the power conversion efficiency.

2. Flyback application

It is particularly suitable for flyback topologies, such as in adapters and chargers, and can provide higher efficiency and lower temperature operation.

3. Automotive electronics

This chip complies with automotive-grade application standards and is suitable for scenarios that require high reliability and high power density, such as on-board chargers and industrial automation equipment.

4. Load switch

Due to its low on-resistance and fast switching performance, this chip is also suitable for load switching applications, enabling efficient power management and rapid switching

 

V. Summary

The IPA80R450P7XKSA1 is a high-performance N-channel MOSFET chip. With its high withstand voltage, low on-resistance and fast switching performance, it is widely used in switching power supplies, 

flyback topologies, industrial equipment, automotive electronics, load switches and motor drives, etc. Its outstanding performance and reliability make it an ideal choice in modern electronic system design.

Industry Information

Product Index :