Home > Industry Information > Introduction To MCP6002T-E/SN
The MCP6002T-E/SN is a dual-channel general-purpose operational amplifier produced by Microchip Technology, featuring rail-to-rail output, low power consumption and wide operating voltage range, suitable for various low-voltage, low-power linear amplification scenarios.
Category:Integrated Circuits (ICs),Linear,Amplifiers,Instrumentation, Op Amps, Buffer Amps
Mfr:Microchip Technology
Packaging:Tape & Reel
Part Status:Active
Amplifier Type:Standard (General Purpose)
Output Type:Rail-to-Rail
Slew Rate:0.6V/µs
Gain Bandwidth Product:1 MHz
Current - Input Bias:1 pA
Voltage - Input Offset:4.5 mV
Current - Supply:100µA (x2 Channels)
Current - Output / Channel:23 mA
Voltage - Supply Span (Min):1.8 V
Voltage - Supply Span (Max):6 V
Operating Temperature:-40°C ~ 125°C (TA)
Mounting Type:Surface Mount
Package / Case:8-SOIC (0.154", 3.90mm Width)
Dual Channels:Equipped with two independent general-purpose operational amplifier channels, which can handle two groups of signal amplification tasks simultaneously, improving circuit integration and reducing board space occupancy.
Rail-to-Rail Output:Adopts rail-to-rail output design, allowing the output voltage to swing close to the positive and negative power supply rails, maximizing the output dynamic range and improving signal utilization efficiency.
Low Power Consumption:The supply current is only 100µA per channel, featuring ultra-low power consumption, which is particularly suitable for battery-powered portable electronic devices and low-power system designs.
Wide Voltage Range:The operating voltage span ranges from 1.8V to 6V, supporting both single-power and low-voltage power supply scenarios, compatible with most low-voltage electronic systems and battery-powered devices.
Low Input Bias:The input bias current is as low as 1 pA, and the input offset voltage is 4.5 mV, ensuring high input impedance and amplification accuracy, reducing signal distortion during weak signal amplification.
Sensor Signal Conditioning:Used for signal conditioning of temperature sensors (such as thermistors) and pressure sensors, amplifying the weak analog signals output by the sensors to meet the sampling requirements of microcontrollers (MCUs), improving measurement accuracy.
Portable Medical Equipment:Applied in small portable medical devices such as blood glucose meters and heart rate monitors, providing low-power, high-precision signal amplification for physiological signal detection, ensuring stable operation of battery-powered equipment.
Audio Amplification:Used in low-power audio amplification circuits such as portable speakers and headphone amplifiers, with rail-to-rail output to ensure clear audio quality and low power consumption to extend the battery life of the device.
Data Acquisition Systems:Integrated into low-power data acquisition systems, amplifying the analog signals collected by the system, matching the input range of ADC modules, and ensuring the accuracy of data collection.
Battery-Powered Devices:Used in battery-powered portable electronic products such as AI chessboards and handheld detectors,utilizing its low power consumption and wide voltage range to extend the service life of the device battery and ensure stable operation.
Analog Filters:Composed of active filters with resistors and capacitors, used in low-frequency signal filtering scenarios such as industrial control equipment, reducing interference signals and improving the stability of the main signal.
The MCP6002T-E/SN is a high-performance, low-power dual-channel general-purpose operational amplifier with excellent electrical parameters and compact packaging. It is widely applicable to various low-voltage, low-power, and high-precision amplification scenarios, providing a reliable and cost-effective solution for electronic product design.
Industry Information
